TigerGraph REST API

TigerGraph’s REST API endpoints exist on the REST++ and the GSQL server. REST++ (or RESTPP) is the TigerGraph customized REST server. Our API accepts URL-encoded query string parameters, JSON-encoded request bodies and returns JSON encoded responses.

This user guide provides information on how to engage with our REST APIs: the introduction section explains how to send requests, pass parameters, and format request bodies, while Built-in Endpoints describes in detail each endpoint and its input and output.

To submit a request, send an HTTP request to the REST++ server or the GSQL server. By default, the REST++ server listens for requests at port 9000 and the GSQL server listens on port 14240. A request needs to specify the following:

  • The request method (GET, POST, PUT, or DELETE)

  • The endpoint address

  • Any required or optional request parameters in URL encoding

  • For POST requests, a data payload (i.e., request body) in JSON encoding unless otherwise specified

  • In some cases, request header parameters

For requests that are sent to the GSQL server, the sender needs to provide TigerGraph user credentials for the request to be accepted. If authentication is enabled on the RESTPP server, a request token needs to be included in the request header as well.

In a test or development environment, the requester may be on the same server as REST++. In this case, the server IP is localhost.

Formatting query string parameters

TigerGraph’s API endpoints accept parameters in URL encoding, which is straightforward in the case of string, number, and boolean values. However, some parameters, such as parameters for running a query, are more complex and require specific formatting.

The following table describes how to format the complex type parameter values when executing a query.

Parameter type Description Example

SET or BAG of primitives

Assign multiple values to the same parameter name.

A SET<INT> parameter named p1 is assigned three integers:

p1=1&p1=5&p1=10

VERTEX with a defined type

Use the primary key of the vertex.

A VERTEX<person> parameter named vp is assigned a vertex whose ID is "person1":

vp=person1

VERTEX without a defined type

Use <parameter_name>.<parameter_type> to specify the type of the parameter, and also provide the primary key of the vertex.

A VERTEX parameter named va is assigned a person type vertex whose ID is "person2"

va=person2&va.type=person

SET or BAG of vertices with a defined type

Same as a SET or BAG of primitives, where the value for each element is the primary key of the vertex.

A SET<VERTEX<person>> parameter named vp is assigned two vertices with IDs "person3" and "person4":

vp=person3&vp=person4

SET or BAG of vertices without a defined type

The SET or BAG must be treated as an array, specifying the order of the elements with indices [0], [1], etc.

A SET<VERTEX> parameter named vp is assigned a person type vertex with an ID of "person5" and a post type vertex with an ID of 11 :

vp[0]=person5&vp[0].type=person&vp[1]=11&vp[1].type=post

Example

Input data for POST requests

Input data for POST requests should be in JSON format, unless the endpoint specifically accepts data in other formats. There are two ways to supply the data: inline or in a separate file.

Inline data

The data should be formatted as a single string without linebreaks. If using curl, use the -d option, followed by the JSON string.

Syntax for a POST request with Inline Data Payload
curl -X POST -d 'json_string' "http://server_ip:9000/path_to_endpoint?request_parameters"

The following example uses the POST /graph endpoint to insert one User type vertex whose ID is id6 into the graph called "Social_Net".

Example using inline input data
curl -X POST -d '{"vertices":{"User":{"id6":{"id":{"value":"id6"}}}}}' "http://localhost:9000/graph/Social_Net"

Data file

Often it will be more convenient for the input data to be in a separate file, especially if the data is large.

For curl, use --data-binary @<path_to_file> as in the following example:

Syntax for a POST request with Payload Data File
curl -X POST --data-binary @./person.csv  "http://localhost:9000/ddl/poc_graph?tag=load_data&filename=f1"

Formatting data in JSON

Data of primitive types, including INT, UINT, FLOAT, DOUBLE, STRING, BOOL, and DATETIME, as well as arrays and objects, follow the standard JSON Data Interchange Syntax.

The following table subsection describes how to format complex data types.

Data type Description Example

SET, LIST or BAG of primitives

Use a JSON array of primitive values.

A set of primitive values: [1, 2, 3]

VERTEX

Use a JSON object that has an id field whose value is the primary key of the vertex and a type field whose value is the type of the vertex.

A person vertex with an ID of "Tom":

{"id": "Tom", "type": "person"}

MAP

Use a JSON object that has two JSON arrays with keys keylist and valuelist, each containing the keys and the values of the map respectively.

The order of items in the valuelist should correspond to the order of items in the keylist.

A map of nations and their capitals:

{"keylist": ["England", "Germany"],
"valuelist": ["London", "Berlin"]}

User-Defined Type (UDT)

Use a JSON object that has two JSON arrays with keys keylist and valuelist. The keylist array contains the field names of the tuple, and the valuelist array contains the values of the fields.

The order of items in the keylist should correspond to the order of the fields as specified in the definition of the tuple/UDT, and the order of values in the valuelist should correspond to the order of items in the keylist.

Tuple schema definition:

TYPEDEF TUPLE <name STRING, age INT> person

A person tuple written in JSON:

{"keylist: ["name", "age"], "valuelist": ["Sam", 24]}

Example: UDT Definition
TYPEDEF TUPLE <field1 INT(1), field2 UINT, field3 STRING(10), field4 DOUBLE> myTuple

Vertices with composite keys

This format for vertices with composite keys does not apply to the endpoint used to upsert data. It is only applicable to the endpoint to run a query.

If a vertex has a composite key composed of multiple attributes, then all values for those attributes must be provided for the "id" field. The values can be presented either as a JSON object with key-value pairs for each attribute-value pair, or as a JSON array with a list values in the same order as defined in the schema.

The following example shows the two methods for a vertex v having a composite primary key composed of the three attributes id and name

  • Option 1

  • Option 2

Vertex v with composite key as JSON array
{
  "v":{
    "id":["Tom",456], (1)
    "type":"compositePerson"
  }
}
1 The values in the array must be in the same order as they are defined in the schema.
Vertex v with composite key as JSON object
{
  "v":{
    "id":{
      "name":"Tom",
      "id":456
    },
    "type":"compositePerson"
  }
}

SET or BAG of Vertices

To describe a SET or BAG of vertices in JSON, use a JSON array with vertex objects nested in the SET or BAG array.

Output responses

All TigerGraph REST responses are in JSON format. The output JSON object has four fields: "version", "error", "message", and "result".

  • "version" - this field describes the version of the running TigerGraph instance.

  • "error" - a boolean value to indicate if there is an error in processing the request. If there is an error, the "error" field will be true.

  • "message" - the error message when there is an error. If a request is successful, the field will be an empty string or a brief message conveying the result of the request.

  • "results" - this field contains the resulting data from the request. Details about the result of each built-in endpoint are described in the Built-in Endpoints section.

// Example response
{
  "version": {
    "api": "v2",
    "schema": 0
  },
  "error": false,
  "message": "",
  "results": [
    {
      "v_id": "id1",
      "v_type": "User",
      "attributes": {}
    }
  ]
}

To make the JSON output more human-readable in the terminal, use the jq command or Python json library built into most Linux installations:

curl -X method "http://server_ip:9000/path_to_endpoint?request_parameters" | jq .

curl -X method "http://server_ip:9000/path_to_endpoint?request_parameters" | python -m json.tool

Size and time limits

The maximum length for the request URL is 8K bytes, including the query string. Requests with a large parameter size should use a data payload file instead of inline data.

Request body size

The maximum size for a request body, including the payload file, is set by the system parameter Nginx.ClientMaxBodySize. The default value is 200 (in MB). To increase this limit, use the following gadmin command:

gadmin config set Nginx.ClientMaxBodySize NNN

The upper limit of this setting is 1024 MB. Raising the size limit for the data payload buffer reduces the memory available for other operations, so be cautious about increasing this limit.

GSQL query timeout

By default, an HTTP request in the TigerGraph system times out after 16 seconds. to customize this timeout limit for a particular query instance, you can set the GSQL-TIMEOUT parameter in the request header. If you are using curl to submit your RESTPP request, the syntax would be the following:

curl -X <GET/POST> -H "GSQL-TIMEOUT: <timeout value in ms>" '<request_URL>'

Response size

You can specify the response size limit of an HTTP request with the following header:

curl -X <GET/POST> -H "RESPONSE-LIMIT: <size limit in byte>" '<request_URL>'

If the response size is larger than the given limit, an error message will be returned instead of the actual query result:

{
  "error": true,
  "message": "The query response size is 256MB, which exceeds limit 32MB.",
  "results": [],
  "code": "REST-4000"
}

curl options

Request examples in this guide are made using curl. Below is a list of curl options used in our code examples:

  • -d <data>

    • Sends the specified data in a POST request to the HTTP server in the same way that a browser does when a user has filled in an HTML form and presses the submit button. This will cause curl to pass the data to the server using the content-type application/x-www-form-urlencoded.

    • If you start the data with the character @, the rest should be a filepath from which to read the data. The command curl -d @foobar will read data from a file named foobar.

  • --data-binary <data>

    • Sends data with a POST request exactly as specified with no extra processing.

  • --fail

    • Makes curl fail silently (no output at all) on server errors.

    • This is mostly done to enable scripts etc. to better deal with failed attempts. In normal cases when an HTTP server fails to deliver a document, it returns an HTML document stating so (which often also describes why and more). This flag will prevent curl from outputting that and return error 22.

  • -H <header>

    • Extra header to include in the request when sending HTTP to a server. You may specify any number of extra headers.

    • TigerGraph APIs use headers to specify size and time limits, as well as to provide RESTPP authentication tokens.

  • -s

    • Silent or quiet mode. Don’t show a progress meter or error messages. It will still output the data you ask for, potentially even to the terminal/stdout unless you redirect it.

  • -u <user:password>

    • Submits the specified user name and password for server authentication.

  • -X <request_method>

    • Specifies a custom request method to use when communicating with the HTTP server. If this option is not used, curl will make a GET request by default.