Database Import/Export All Graphs

The GSQL EXPORT GRAPH ALL and IMPORT GRAPH ALL commands perform a logical backup and restore. A database EXPORT contains the database’s data, and optionally some types of metadata. This data can be subsequently imported in order to recreate the same database, in the original or in a different TigerGraph platform instance.

To see how to Export/Import selected individual graphs in a database refer to Import/Export Individual Graphs.

Import/export is a complement to Backup and Restore, but not a substitute. See the Known Issues for additional considerations.

Import Prerequisite

To import an exported database, ensure that the export files are from a database that was running the exact same version of TigerGraph as the database that you are importing into.

Known Issues

  • Running either EXPORT GRAPH ALL or IMPORT GRAPH ALL resets the TigerGraph superuser’s password back to its default value. After running either command, change the superuser’s password to make it secure again.

  • User-defined loading jobs containing DELETE statements are not exported correctly.

  • If a graph contains vertex or edge types with a composite key, the graph data is exported in a nonstandard format that cannot be re-imported.

  • GSQL EXPORT GRAPH may fail and cause a GPE to crash when UDT type has a fixed STRING size.

EXPORT GRAPH ALL

The EXPORT GRAPH ALL command reads the data and metadata for all graphs in the TigerGraph system and writes the information to a zip file in the designated folder. If the command provides no options, it performs a full export, including schema, data, template information, and user profiles.

Required privilege

EXPORT_GRAPH

Synopsis

EXPORT GRAPH ALL [<export_options>] TO "<directory_name>"


exportOptions ::=
(-S | --SCHEMA | -T | --TEMPLATE | -D | --DATA | -U | --USERS | -P | --PASSWORD pwd)


    -S, --SCHEMA        Only Schema will be exported
    -T, --TEMPLATE      Only Schema, Queries, Loading Jobs, UDFs
    -D, --DATA          Only Data Sources will be exported
    -U, --USERS         Includes Permissions, Secrets, and Tokens
    -P, --PASSWORD      Encrypt with password. User will be prompted
        --SEPARATOR     Specify a column separator
        --EOL           Specify a line separator
The export directory should be empty before running the command.

Parameters

Parameter Description

directory_name

The path of the directory to output export files to. Must be an absolute path.

Export All Options

Option Description

-S or --SCHEMA

Only export graph schema.

-T or --TEMPLATE

Only export graph schema, queries, loading jobs and UDFs.

-D or --DATA

Must be used with either -S or -T. Export data in CSV in addition to graph schema or template.

-U or --Users

Must be used with either -S or -T. Export users, role assignments, secrets, and tokens.

-P or --Password

Encrypt the exported file with a password. Users will be prompted to enter a password when using this option.

-p

Pass to “/path/to/dir“.

--SEPARATOR

Specify the column separator character. Default is ASCII char 29.

--EOL

Specify the line separator character. Default is ASCII char 28.

Proxy users cannot be exported.

ASCII char 30 (RS) and 31 (US) are reserved separators that cannot be used for data export.

Non-Interactive Mode export graph all

Run the command like this to run export graph all in non-interactive mode.

Example:
export graph all -p pass to “/path/to/dir“

Output

The EXPORT GRAPH ALL command exports all graphs in the database.

The export contains the following categories of files:

  • Data files in CSV format, one file for each type of vertex and each type of edge in a single node.

    However, for cluster environments, since the data files are spread across the nodes, they will not be included in the zip file.

  • GSQL DDL command files created by the export command. The import command uses these files to recreate the graph schema(s) and reload the data.

  • Copies of the database’s queries, loading jobs, and user-defined functions.

  • GSQL command files used to recreate the users and their privileges.

  • An encrypted file containing the Access Control List (ACL) privilege catalog.

When exporting graphs, ACLs are only exported when both queries and users are exported.

  • If you use the -U option without using the -T option, there is no ACL on the exported graphs because there are no queries.

  • If you use the -T option without using the -U option, the ACL entries on the exported are reset to the unspecified status.

The following files are created in the specified directory when exporting and are then zipped into a single file named ExportedGraph.zip.

If the file is password-protected, it can only be unzipped using the GSQL command IMPORT GRAPH ALL. The security features prevent users from directly unzipping it.

  • A DBImportExport_<Graph_Name>.gsql for each graph called Graph_Name in a multigraph database that contains a series of GSQL DDL statements that do the following:

    • Create the exported graph, along with its local vertex, edge, and tuple types,

    • Create the loading jobs from the exported graphs

    • Create data source file objects

    • Create queries

  • A graph_<Graph_Name>/ folder for each graph in a multigraph database containing data for local vertex/edge types in <Graph_Name>. For each vertex or edge type called <type>, there is one of the following two data files:

    • vertex_<type>.csv

    • edge_<type>.csv

  • global.gsql - DDL job to create all global vertex and edge types, and data sources.

  • tuple.gsql - DDL job to create all User Defined Tuples.

  • Exported data and jobs used to restore the data:

    • GlobalTypes/ - folder containing data for global vertex/edge types

      • vertex_name.csv

      • edge_name.csv

    • run_loading_jobs.gsql - DDL created by the export command which will be used during import:

      • Temporary global schema change job to add user-defined indexes. This schema job is dropped after it has run.

      • Loading jobs to load data for global and local vertex/edges.

  • Database’s saved queries, loading jobs, and schema change jobs

    • SchemaChangeJob/ -* folder containing DDL for schema change jobs. See section "Schema Change Jobs" for more information

      • Global_Schema_Change_Jobs.gsql contains all global schema change jobs

      • Graph_Name_Schema_Change_Jobs.gsql contains schema change jobs for each graph Graph_Name

  • User-defined functions

    • Tokenbank.cpp - copy of <tigergraph.root.dir>/app/<VERSION_NUM>/dev/gdk/gsql/src/TokenBank/TokenBank.cpp

    • ExprFunctions.hpp - copy of <tigergraph.root.dir>/app/<VERSION_NUM>dev/gdk/gsql/src/QueryUdf/ExprFunctions.hpp

    • ExprUtil.hpp - copy of <tigergraph.root.dir>/app/<VERSION_NUM>/dev/gdk/gsql/src/QueryUdf/ExprUtil.hpp

  • Users:

    • users.gsql - DDL to create all exported users, import Secrets and Tokens and grant permissions.

  • ACL privilege catalog:

    • ACLDict/1/ACLPrivilegeCatalog.json. An encrypted file containing the ACL privilege catalog.

Example
EXPORT GRAPH ALL TO "/tmp/export_graphs/"

Insufficient disk space

If not enough disk space is available for the data to be exported, the system returns an error message indicating not all data has been exported. Some data may have already been written to disk. If an insufficient disk error occurs, the files will not be zipped, due to the possibility of corrupted data which would then corrupt the zip file. The user should clear enough disk space, including deleting the partially exported data, before reattempting the export.

It is possible for all the files to be written to disk and then to run out of disk space during the zip operation. If that is the case, the system will report this error. The unzipped files will be present in the specified export directory.

Export timeout

If the timeout limit is reached during export, the system returns an error message indicating not all data has been exported. Some data may have already been written to disk. If a timeout error occurs, the files will not be zipped. The user should delete the export files, increase the timeout limit and then rerun the export.

The timeout limit is controlled by the session parameter export_timeout. The default timeout is ~138 hours. To change the timeout limit, use the command:

SET EXPORT_TIMEOUT = <timeout_in_ms>

IMPORT GRAPH ALL

The IMPORT GRAPH ALL command unzips the .zip file ExportedGraph.zip located in the designated folder, and then runs the GSQL command files.

IMPORT GRAPH ALL erases the current database (equivalent to running DROP ALL). The current version does not support incremental or supplemental changes to an existing database (except for the --keep-users option).

IMPORT GRAPH ALL looks for specific filenames. If either the zip file or any of its contents are renamed by the user, IMPORT GRAPH ALL may fail.

Any separator character defined in the export step is automatically included in the exported file. There is no need to specify the separator during import.

Please be extra cautious when importing databases as it can overwrite the current solution, resulting in the deletion of existing schemas, load jobs, queries, and data files. Importing a new solution cannot be undone to restore the previous state, regardless of whether the import succeeds or fails.

Therefore, create a complete backup beforehand in case you need to restore the database: Back up a Database Cluster

For security purposes, TigerGraph has two gadmin commands, GSQL.UDF.Policy.Enable and GSQL.UDF.Policy.HeaderAllowlist to prevent malicious code execution during import. Please refer to the section on UDF Security to ensure that UDFs comply with the security specifications. This will help you import the solution successfully.

Required privileges

WRITE_SCHEMA, WRITE_QUERY, WRITE_LOADINGJOB, EXECUTE_LOADINGJOB, DROP ALL, WRITE_USERS

Synopsis

IMPORT GRAPH ALL [import_options] FROM "<filename>"

importOptions ::= [-P | --PASSWORD ] [ (-KU | -- keep-users]
    -P,  --PASSWORD     Decrypt with password. User will be prompted.
    -p,                 Pass from “/path/to/dir“.
    -KU, --KEEP-USERS   Do not delete user identities before importing

Parameters

Parameter Description

filename

The path to the zip file produced by the EXPORT GRAPH ALL command. Must be an absolute path.

Import All Options

Option Description

-P or --PASSWORD

Decrypt with password. You will be prompted to enter a password when using this option.

-KU or --KEEP-USERS

Keep the current users during the import operation. New users from the imported graph will still be added. Global roles from the current database are kept if you use this option. Local roles are dropped since the graphs themselves are dropped. If you have global roles with local privileges, those privileges are dropped from the global roles as well.

You must include this option if you run the IMPORT GRAPH command as a user other than the default superuser tigergraph.

Example

IMPORT GRAPH ALL FROM "/tmp/export_graphs/"

Non-Interactive Mode import graph all

Run the command like this to run import graph all in non-interactive mode.

Example:
import graph all -p pass from “/path/to/dir“

Loading Jobs

There are two sets of loading jobs:

  • Those that were in the catalog of the database which was exported. These are embedded in the file DBImportExport_Graph_Name.gsql

  • Those that are *created by EXPORT GRAPH ALL and are used to assist with the import process. These are embedded in the file run_loading_jobs.gsql.

The catalog loading jobs are not needed to restore the data. They are included for archival purposes.

Some special rules apply to importing loading jobs. Some catalog loading jobs will not be imported.

  1. If a catalog loading job contains DEFINE FILENAME F = "/path/to/file/", the path will be removed and the imported loading job will only contain DEFINE FILENAME F. This is to allow a loading job to still be imported even though the file may no longer exist or the path may be different due to moving to another TigerGraph instance.

  2. If a specific file path is used directly in the LOAD statement, and the file cannot be found, the loading job cannot be created and will be skipped. For example, LOAD "/path/to/file" to vertex v1 cannot be created if /path/to/file does not exist.

  3. Any file path using $sys.data_root will be skipped. This is because the value of $sys.data_root is not retained from an export. During an import, $sys.data_root is set to the root folder of the import location.

Schema Change Jobs

There are two sets of schema change jobs:

  1. Those that were in the catalog of the database which was exported. These are stored in the folder /SchemaChangeJobs.

  2. Those that were created by EXPORT GRAPH ALL and are used to assist with the import process. These are in the run_loading_jobs.gsql command file. The jobs are dropped after the import command is finished with them.

The database’s schema change jobs are not executed during the import process. This is because if a schema change job had been run before the export, then the exported schema already reflects the result of the schema change job. The directory /SchemaChangeJobs contains these files:

  • Global_Schema_Change_Jobs.gsql contains all global schema change jobs

  • <Graph_Name>_Schema_Change_Jobs.gsql contains schema change jobs for each graph <Graph_Name>.

Cluster export/import

Importing and exporting clusters is not fully automated in the current version. The database can be exported and imported by following some additional steps.

Export from a cluster

Rather than creating a single export zip file, the EXPORT GRAPH ALL command creates a file for each machine.

To export, run EXPORT GRAPH ALL from the GSQL shell on one node. The EXPORT GRAPH command does not bundle all the files to one server, and it does not compress each server’s files to one zip file. Some files, including the data files, are exported to each server, while some files are only on the local server where EXPORT GRAPH was run.

Import into a cluster

The following are the steps to import an export file to a cluster.

You may only import to a cluster that has the same number and configuration of servers as the data from which the export originated.

1. Transfer files to new cluster

Transfer the export files from the export servers to the corresponding servers in the new cluster. For example, the files on the m1 node of the cluster that exported the graphs must be copied to the m1 server on the cluster that is importing the export files.

The export file on every node must share the same absolute path.

2. Run IMPORT GRAPH ALL

Run the IMPORT GRAPH ALL command from the server that corresponds to the server where EXPORT GRAPH ALL was run.

For example, if you exported from the m2 node in a cluster, you also need to run the IMPORT GRAPH ALL command from the m2 node of the cluster you are importing the export files into.