Configuration Parameters

This page lists the configuration parameters that are available for gadmin config.

To change a parameter, use the following command:

$ gadmin config set <parameter> <value>

After updating a parameter, run gadmin config apply to apply the change and restart the corresponding services to make the change take effect.

Admin

Name Description Default

Admin.BasicConfig.Env

The runtime environment variables, separated by ‘;’

LD_LIBRARY_PATH=$LD_LIBRARY_PATH;

Admin.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

Admin.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

Admin.BasicConfig.LogConfig.LogLevel

The log level(“INFO”,“WARN”,“ERROR”), default is INFO

INFO

Admin.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

Admin.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for Admin

admin

Admin.BasicConfig.Nodes

The node list for Admin

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

Admin.Port

The port for Admin

12471

Controller

Name Description Default

Controller.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

Controller.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

Controller.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

Controller.BasicConfig.LogConfig.LogLevel

The log level(“DEBUG”,“INFO”,“WARN”,“ERROR”,“PANIC”,“FATAL”), default is INFO

INFO

Controller.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

Controller.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for Controller

controller

Controller.BasicConfig.Nodes

The nodes to deploy Controller

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

Controller.ConfigRepoRelativePath

The relative path (to the System.DataRoot) of config repo where the service config files are stored

configs

Controller.FileRepoRelativePath

The relative path (to the System.DataRoot) of the file repo for file management

files

Controller.FileRepoVersionNum

The maximum version of files to keep in the file repo

3

Controller.LeaderElectionHeartBeatIntervalMS

The maximum interval(milliseconds) at which each service should call controller leader election service to be considered alive.

6000

Controller.LeaderElectionHeartBeatMaxMiss

The maximum number of heartbeat can be missed before one service is considered dead by controller

5

Controller.Port

The serving grpc port for Controller

9188

Dict

Name Description Default

Dict.BasicConfig.Env

The runtime environment variables, separated by ‘;’

LD_LIBRARY_PATH=$LD_LIBRARY_PATH;

Dict.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

Dict.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

Dict.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

Dict.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for Dict

dict

Dict.BasicConfig.Nodes

The node list for Dict

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

Dict.Port

The port for Dict

17797

ETCD

Name Description Default

ETCD.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

ETCD.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

ETCD.BasicConfig.LogConfig.LogLevel

The log level(“DEBUG”,“INFO”,“WARN”,“ERROR”,“PANIC”,“FATAL”), default is INFO

INFO

ETCD.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

ETCD.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for ETCD

etcd

ETCD.BasicConfig.Nodes

The node list for ETCD

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

ETCD.ClientPort

The port of ETCD to listen for client traffic

20000

ETCD.DataRelativePath

The data dir of etcd under $DataRoot

etcd

ETCD.ElectionTimeoutMS

Time (in milliseconds) for an election to timeout

1000

ETCD.HeartbeatIntervalMS

Time (in milliseconds) of a heartbeat interval

100

ETCD.MaxRequestBytes

Maximum client request size in bytes the server will accept

52428800

ETCD.MaxSnapshots

Maximum number of snapshot files to retain (0 is unlimited)

5

ETCD.MaxTxnOps

Maximum number of operations permitted in a transaction

8192

ETCD.MaxWals

Maximum number of wal files to retain (0 is unlimited)

5

ETCD.PeerPort

The port of ETCD to listen for peer traffic

20001

ETCD.SnapshotCount

Number of committed transactions to trigger a snapshot to disk

50000

Executor

Name Description Default

Executor.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

Executor.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

Executor.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

Executor.BasicConfig.LogConfig.LogLevel

The log level(“DEBUG”,“INFO”,“WARN”,“ERROR”,“PANIC”,“FATAL”), default is INFO

INFO

Executor.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

Executor.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for Executor

executor

Executor.BasicConfig.Nodes

The nodes to deploy Executors

[{"HostID":"m1","Partition":1,"Replica":0},{"HostID":"m2","Partition":2,"Replica":0}]

Executor.DataRelativePath

The data dir of executor under $DataRoot

executor

Executor.FileTransferPort

The port for Executor to do file transfer

9178

Executor.FileVersionNum

The maximum version of files to keep

10

Executor.Port

The serving port for Executor

9177

Executor.WatchDogIntervalMS

The process status check interval (ms)

1000

FileLoader

Name Description Default

FileLoader.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

FileLoader.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

FileLoader.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

FileLoader.BasicConfig.LogConfig.LogLevel

The log level(“OFF”, “BRIEF”, “DEBUG”, “VERBOSE”), default is BRIEF

BRIEF

FileLoader.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

FileLoader.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for FileLoader

fileLoader

FileLoader.Factory.DefaultLoadingTimeoutSec

The default per request loading timeout (s) for FileLoader

600

FileLoader.Factory.DefaultQueryTimeoutSec

The default query timeout (s) for FileLoader

16

FileLoader.Factory.DynamicEndpointRelativePath

FileLoader’s relative (to data root) path to store the dynamic endpoint

fileLoader/endpoint/

FileLoader.Factory.DynamicSchedulerRelativePath

FileLoader’s relative (to data root) path to store the dynamic scheduler

fileLoader/scheduler/

FileLoader.Factory.EnableAuth

Enable authentication of FileLoader

false

FileLoader.Factory.HandlerCount

FileLoader’s handler count

4

FileLoader.Factory.StatsIntervalSec

FileLoader’s time interval to collect stats (e.g. QPS)

60

FileLoader.GPEResponseBasePort

The port of FileLoader to accept GPE response

8400

FileLoader.GSEResponseBasePort

The port of FileLoader to accept GSE response

8500

FileLoader.ReplicaNumber

The number of replica of fileloader per node

1

GPE

Name Description Default

GPE.BasicConfig.Env

The runtime environment variables, separated by ‘;’

LD_PRELOAD=$LD_PRELOAD; LD_LIBRARY_PATH=$LD_LIBRARY_PATH; CPUPROFILE=/tmp/tg_cpu_profiler; CPUPROFILESIGNAL=12; MALLOC_CONF=prof:true,prof_active:false

GPE.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

GPE.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

GPE.BasicConfig.LogConfig.LogLevel

The log level(“OFF”, “BRIEF”, “DEBUG”, “VERBOSE”), default is BRIEF

BRIEF

GPE.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

GPE.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for GPE

gpe

GPE.BasicConfig.Nodes

The node list for GPE

[{"HostID":"m1","Partition":1,"Replica":1},{"HostID":"m2","Partition":1,"Replica":2}]

GPE.Disk.CompressMethod

The compress method of GPE disk data

nan

GPE.Disk.DiskStoreRelativePath

The path(relative to temp root) to store GPE temporary disk data

gpe/disks

GPE.Disk.LoadThreadNumber

The number of threads to load from disk

1

GPE.Disk.SaveThreadNumber

The number of threads to save to disk

1

GPE.EdgeDataMemoryLimit

The memory limit of edge data

-1

GPE.GPE2GPEResponsePort

The GPE port for receiving response back from other GPEs

7501

GPE.GPERequestPort

The GPE port for receiving requests

7502

GPE.IdResponsePort

The GPE port for receiving id response from GSE

7500

GPE.Kafka.BatchMsgNumber

The number of messages to send in one batch when using async mode. The producer will wait until either this number of messages are ready to send or queue buffer max ms is reached.

64

GPE.Kafka.CompressCodec

This parameter allows you to specify the compression codec for all data generated by this producer. Valid values are none, gzip and snappy.

none

GPE.Kafka.FetchErrorBackoffTimeMS

How long to postpone the next fetch request for a topic+partition in case of a fetch error.

6

GPE.Kafka.FetchWaitMaxTimeMS

The maximum amount of time the server will block before answering the fetch request if there isn’t sufficient data to immediately satisfy fetch min bytes.

10

GPE.Kafka.MsgMaxBytes

Maximum transmit message size.

10485760

GPE.Kafka.QueueBufferMaxMsgNumber

The maximum number of unsent messages that can be queued up the producer when using async mode before either the producer must be blocked or data must be dropped.

64

GPE.Kafka.QueueBufferMaxTimeMS

Maximum time to buffer data when using async mode.

1

GPE.Kafka.QueueMinMsgNumber

Minimum number of messages per topic+partition in the local consumer queue.

100000

GPE.Kafka.RequestRequiredAcks

This field indicates how many acknowledgements the leader broker must receive from ISR brokers before responding to the request.

1

GPE.MemoryLimitMB

The total topology memory limit GPE

0

GPE.NumberOfHashBucketInBit

The number of bits used to represent hash bucket counts.

5

GPE.RebuildThreadNumber

The number of rebuild threads for GPE

3

GPE.StopTimeoutMS

Stop GPE timeout

300000

GPE.VertexDataMemoryLimit

The memory limit of vertex data

-1

GSE

Name Description Default

GSE.BasicConfig.Env

The runtime environment variables, separated by ‘;’

LD_PRELOAD=$LD_PRELOAD; LD_LIBRARY_PATH=$LD_LIBRARY_PATH; CPUPROFILE=/tmp/tg_cpu_profiler; CPUPROFILESIGNAL=12; MALLOC_CONF=prof:true,prof_active:false

GSE.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

GSE.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

GSE.BasicConfig.LogConfig.LogLevel

The log level(“OFF”, “BRIEF”, “DEBUG”, “VERBOSE”), default is BRIEF

BRIEF

GSE.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

GSE.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for GSE

gse

GSE.BasicConfig.Nodes

The node list for GSE

[{"HostID":"m1","Partition":1,"Replica":1},{"HostID":"m2","Partition":1,"Replica":2}]

GSE.IdRequestPort

The id request serving port of GSE

6500

GSE.JournalTopicPrefix

Kafka Topic prefix of GSE journal storage/replication

GSE_journal_

GSE.LeaderElectionTTLSec

The time-to-live of a GSE election participant.A GSE will be kicked out of election if one GSE is not responsive after the TTL.

30

GSE.RLSPort

The serving port of GSE RLS

8900

GSE.StopTimeoutMS

Stop GSE timeout

300000

GSQL

Name Description Default

GSQL.BasicConfig.Env

The runtime environment variables, separated by ‘;’

CPATH=$CPATH; LD_LIBRARY_PATH=$LD_LIBRARY_PATH;

GSQL.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

GSQL.BasicConfig.LogConfig.LogLevel

GSQL log level: ERROR, INFO, DEBUG

INFO

GSQL.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

GSQL.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for GSQL

gsql

GSQL.BasicConfig.Nodes

The node list for GSQL

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

GSQL.CatalogBackupFileMaxDurationDay

The maximum number of days for catalog backup files to retain

30

GSQL.CatalogBackupFileMaxNumber

The maximum number of catalog backup files to retain

20

GSQL.DataRelativePath

The data dir of gsql under $DataRoot

gsql

GSQL.EnableStringCompress

Enable string compress

false

GSQL.FileOutputPolicy

The policy to control file outputs in GSQL queries

["/"]

GSQL.GithubBranch

The working branch in provided repository. Will use ‘master’ as the default branch

nan

GSQL.GithubPath

The path to the directory in the github that has TokenBank.cpp, ExprFunctions.hpp, ExprUtil.hpp, e.g. sample_code/src

nan

GSQL.GithubRepository

The repository name, e.g. tigergraph/ecosys

nan

GSQL.GithubUrl

The url that is used for github enterprise, e.g. https://api.github.com

nan

GSQL.GithubUserAcessToken

The credential for github. Set it to ‘anonymous’ for public access, or empty to not use github

nan

GSQL.GrpcMessageMaxSizeMB

The maximum size of grpc message request of gsql

40

GSQL.ManageCatalogTimeoutSec

GSQL connection timeout (second) to admin server when trying to

nan

GSQL.MaxAuthTokenLifeTimeSec

The maximum lifetime of auth token in seconds, 0 means unlimited

0

GSQL.OutputTokenBufferSize

The buffer size for output token from GSQL

16000000

GSQL.Port

The server port for GSQL

8123

GSQL.QueryResponseMaxSizeByte

Maximum response size in byte

33554432

GSQL.RESTPPRefreshTimeoutSec

Refresh time in Seconds of Restpp

60

GSQL.SchemaIndexFileNumber

File number

10

GSQL.TokenCleaner.GraceTimeSec

The grace time (in seconds) for expired tokens to exist without being cleaned

0

GSQL.TokenCleaner.IntervalTimeSec

The running interval of TokenCleaner in seconds

10800

GSQL.UserInfoLimit.TokenSizeLimit

The max number of tokens allowed

60000

GSQL.UserInfoLimit.UserCatalogFileMaxSizeByte

The file size limit for user metadata in byte

2097152

GSQL.UserInfoLimit.UserSizeLimit

The max number of users allowed

12000

GSQL.WaitServiceOnlineTimeoutSec

Timeout to wait for all services online

60

GUI

Name Description Default

GUI.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

GUI.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

GUI.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

GUI.BasicConfig.LogConfig.LogLevel

The log level(“DEBUG”,“INFO”,“WARN”,“ERROR”,“PANIC”,“FATAL”), default is INFO

INFO

GUI.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

GUI.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for GUI

gui

GUI.BasicConfig.Nodes

The node list for GraphStudio

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

GUI.ClientIdleTimeSec

The maximum idle time of client-side GraphStudio and AdminPortal before inactivity logout

604800

GUI.Cookie.DurationSec

GUI Cookie duration time in seconds

86400

GUI.Cookie.SameSite

Default mode: 1; Lax mode: 2; Strict mode: 3; None mode: 4

3

GUI.DataDirRelativePath

The relative path of gui data folder (to the System.DataRoot)

gui

GUI.EnableDarkTheme

The boolean value on whether or not GUI should enable dark theme

true

GUI.GraphStatCheckIntervalSec

The internval(in seconds) GraphStudio wait before checking the graph statistics

10

GUI.HTTPRequest.RetryMax

GUI http request max retry times

4

GUI.HTTPRequest.RetryWaitMaxSec

GUI HTTP request max retry waiting time in seconds

30

GUI.HTTPRequest.RetryWaitMinSec

GUI HTTP request minimum retry waiting time in seconds

1

GUI.HTTPRequest.TimeoutSec

GUI HTTP request timeout in seconds

3600

GUI.Port

The serving port for GraphStudio Websocket communication

14242

GUI.RESTPPResponseMaxSizeBytes

The RESTPP response size limit bytes.

33554432

GUI.TempDirRelativePath

The relative path of gui temp folder (to the System.TempRoot)

gui

GUI.TempFileMaxDurationDay

GUI temp file max duration time in days

7

Gadmin

Name Description Default

Gadmin.StartServiceDefaultTimeoutMS

The start one service default timeout in milliseconds

30000

Gadmin.StartStopRequestTimeoutMS

The start/stop service default request timeout in milliseconds

600000

Gadmin.StopServiceDefaultTimeoutMS

The stop one service default request timeout in milliseconds

30000

Informant

Name Description Default

Informant.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

Informant.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

Informant.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

Informant.BasicConfig.LogConfig.LogLevel

The log level(“DEBUG”,“INFO”,“WARN”,“ERROR”,“PANIC”,“FATAL”), default is INFO

INFO

Informant.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

Informant.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for Informant

informant

Informant.BasicConfig.Nodes

The nodes to deploy Informant

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

Informant.DBRelativePath

The relative path (to the System.DataRoot) of informant database source folder

informant/db

Informant.GrpcPort

The grpc server port for Informant

9166

Informant.RestPort

The restful server port for Informant

9167

Informant.RetentionPeriodDay

The period in days for local database records to keep, set -1 for keeping forever

30

Kafka

Name Description Default

Kafka.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

Kafka.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

Kafka.BasicConfig.LogConfig.LogLevel

The log level for kafka (“TRACE”, “DEBUG”, “INFO”, “WARN”, “ERROR”, “FATAL” “OFF”)

INFO

Kafka.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

Kafka.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for Kafka

kafka

Kafka.BasicConfig.Nodes

The node list for Kafka

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

Kafka.DataRelativePath

The data dir of kafka under $DataRoot

kafka

Kafka.IOThreads

The number of threads for Kafka IO

2

Kafka.LogFlushIntervalMS

The threshold of time for flushing log (ms)

10000

Kafka.LogFlushIntervalMessage

The threshold of message for flushing log

10000

Kafka.MessageMaxSizeMB

The maximum size of a message of Kafka to be produced (megabytes)

10

Kafka.MinInsyncReplicas

The minimal number of insync replicas that must acknowledge, when producer sets acks to ‘all’

1

Kafka.NetworkThreads

The number of threads for Kafka Network

4

Kafka.Port

The serving port for Kafka

30002

Kafka.RetentionHours

The minimum age of a log file of Kafka to be eligible for deletion (hours)

168

Kafka.RetentionSizeGB

The minimum size of a log file of Kafka to be eligible for deletion (gigabytes)

40

Kafka.StartTimeoutMS

Start kafka timeout

300000

Kafka.TopicReplicaFactor

The default replica number for each topic

1

KafkaConnect

Name Description Default

KafkaConnect.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

KafkaConnect.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

KafkaConnect.BasicConfig.LogConfig.LogLevel

The log level for kafka connect (“TRACE”, “DEBUG”, “INFO”, “WARN”, “ERROR”, “FATAL” “OFF”)

INFO

KafkaConnect.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

KafkaConnect.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for Kafka connect

kafkaconn

KafkaConnect.BasicConfig.Nodes

The node list for Kafka connect

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

KafkaConnect.MaxPollIntervalMS

The interval between Kafka connect poll loop processing message

900000

KafkaConnect.MaxRequestSize

The max request size of kafka connect producer

5242880

KafkaConnect.OffsetFlushIntervalMS

The interval at which Kafka connect tasks’ offsets are committed

10000

KafkaConnect.Port

The port used for kafka connect

30003

KafkaConnect.ReconnectBackoffMS

The amount of time to wait before attempting to reconnect to a given host

500

KafkaConnect.RetryBackoffMS

The amount of time to wait before attempting to retry a failed fetch request to a given topic partition

10000

KafkaLoader

Name Description Default

KafkaLoader.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

KafkaLoader.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

KafkaLoader.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

KafkaLoader.BasicConfig.LogConfig.LogLevel

The log level(“OFF”, “BRIEF”, “DEBUG”, “VERBOSE”), default is BRIEF

BRIEF

KafkaLoader.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

KafkaLoader.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for KafkaLoader

kafkaLoader

KafkaLoader.Factory.DefaultLoadingTimeoutSec

The default per request loading timeout (s) for KafkaLoader

600

KafkaLoader.Factory.DefaultQueryTimeoutSec

The default query timeout (s) for KafkaLoader

16

KafkaLoader.Factory.DynamicEndpointRelativePath

KafkaLoader’s relative (to data root) path to store the dynamic endpoint

kafkaLoader/endpoint/

KafkaLoader.Factory.DynamicSchedulerRelativePath

KafkaLoader’s relative (to data root) path to store the dynamic scheduler

kafkaLoader/scheduler/

KafkaLoader.Factory.EnableAuth

Enable authentication of KafkaLoader

false

KafkaLoader.Factory.HandlerCount

KafkaLoader’s handler count

4

KafkaLoader.Factory.StatsIntervalSec

KafkaLoader’s time interval to collect stats (e.g. QPS)

60

KafkaLoader.GPEResponseBasePort

The port of KafkaLoader to accept GPE response

9400

KafkaLoader.GSEResponseBasePort

The port of KafkaLoader to accept GSE response

9500

KafkaLoader.ReplicaNumber

The number of replica of kafkaloader per node

1

KafkaStreamLL

Name Description Default

KafkaStreamLL.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

KafkaStreamLL.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

KafkaStreamLL.BasicConfig.LogConfig.LogLevel

The log level for Kafka stream LoadingLog (“TRACE”, “DEBUG”, “INFO”, “WARN”, “ERROR”, “FATAL” “OFF”)

INFO

KafkaStreamLL.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

KafkaStreamLL.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for Kafka stream LoadingLog

kafkastrm-ll

KafkaStreamLL.BasicConfig.Nodes

The node list for Kafka stream LoadingLog

[{"HostID":"m1","Partition":1,"Replica":0},{"HostID":"m2","Partition":2,"Replica":0}]

KafkaStreamLL.MaxPartitionFetchBytes

Max partition fetch bytes size

10485760

KafkaStreamLL.Port

The port used for Kafka stream LoadingLog

30004

KafkaStreamLL.StateDirRelativePath

The relative folder path for Kafka stream LoadingLog state

kafkastrm-ll

Nginx

Name Description Default

Nginx.AllowedCIDRList

The whitelist of IPv4/IPv6 CIDR blocks to restrict the application access, separate in comma.

0.0.0.0/0, ::/0

Nginx.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

Nginx.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

Nginx.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

Nginx.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for Nginx

nginx

Nginx.BasicConfig.Nodes

The node list for Nginx

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

Nginx.ClientMaxBodySize

The maximum request size for Nginx in MB

200

Nginx.ConfigTemplate

The template to generate nginx config. Please use @filepath to parse template from file. Check the default template first at https://docs.tigergraph.com.(Warning: Don’t modify the reserved keywords(string like UPPER_CASE) in template.)

worker_processes __WORKER_PROCESSES__;\ndaemon off;\npid __NGINX_PID_PATH__;\n\nevents {\n worker_connections 10240;\n}\n\nhttp {\n\n server_tokens off;\n\n map $request_uri $request_uri_path {\n \~^(?P\u003cpath\u003e[^?]*)(\\?.*)?$\" $path;\n }\n\n log_format combined_no_query '$remote_addr - $remote_user [$time_local] '\n '\"$request_method $request_uri_path $server_protocol\" $status $body_bytes_sent '\n '\"$http_referer\" \"$http_user_agent\"';\n\n\t#Set allowed CIDR blocks\n__CIDR_LIST__\n types {\n text/html html htm shtml;\n text/css css;\n text/xml xml;\n image/gif gif;\n image/jpeg jpeg jpg;\n application/javascript js;\n application/atom+xml atom;\n application/rss+xml rss;\n\n text/mathml mml;\n text/plain txt;\n text/vnd.sun.j2me.app-descriptor jad;\n text/vnd.wap.wml wml;\n text/x-component htc;\n\n image/png png;\n image/svg+xml svg svgz;\n image/tiff tif tiff;\n image/vnd.wap.wbmp wbmp;\n image/webp webp;\n image/x-icon ico;\n image/x-jng jng;\n image/x-ms-bmp bmp;\n\n font/woff woff;\n font/woff2 woff2;\n\n application/java-archive jar war ear;\n application/json json;\n application/mac-binhex40 hqx;\n application/msword doc;\n application/pdf pdf;\n application/postscript ps eps ai;\n application/rtf rtf;\n application/vnd.apple.mpegurl m3u8;\n application/vnd.google-earth.kml+xml kml;\n application/vnd.google-earth.kmz kmz;\n application/vnd.ms-excel xls;\n application/vnd.ms-fontobject eot;\n application/vnd.ms-powerpoint ppt;\n application/vnd.oasis.opendocument.graphics odg;\n application/vnd.oasis.opendocument.presentation odp;\n application/vnd.oasis.opendocument.spreadsheet ods;\n application/vnd.oasis.opendocument.text odt;\n application/vnd.openxmlformats-officedocument.presentationml.presentation\n pptx;\n application/vnd.openxmlformats-officedocument.spreadsheetml.sheet\n xlsx;\n application/vnd.openxmlformats-officedocument.wordprocessingml.document\n docx;\n application/vnd.wap.wmlc wmlc;\n application/x-7z-compressed 7z;\n application/x-cocoa cco;\n application/x-java-archive-diff jardiff;\n application/x-java-jnlp-file jnlp;\n application/x-makeself run;\n application/x-perl pl pm;\n application/x-pilot prc pdb;\n application/x-rar-compressed rar;\n application/x-redhat-package-manager rpm;\n application/x-sea sea;\n application/x-shockwave-flash swf;\n application/x-stuffit sit;\n application/x-tcl tcl tk;\n application/x-x509-ca-cert der pem crt;\n application/x-xpinstall xpi;\n application/xhtml+xml xhtml;\n application/xspf+xml xspf;\n application/zip zip;\n\n application/octet-stream bin exe dll;\n application/octet-stream deb;\n application/octet-stream dmg;\n application/octet-stream iso img;\n application/octet-stream msi msp msm;\n\n audio/midi mid midi kar;\n audio/mpeg mp3;\n audio/ogg ogg;\n audio/x-m4a m4a;\n audio/x-realaudio ra;\n\n video/3gpp 3gpp 3gp;\n video/mp2t ts;\n video/mp4 mp4;\n video/mpeg mpeg mpg;\n video/quicktime mov;\n video/webm webm;\n video/x-flv flv;\n video/x-m4v m4v;\n video/x-mng mng;\n video/x-ms-asf asx asf;\n video/x-ms-wmv wmv;\n video/x-msvideo avi;\n }\n default_type application/octet-stream;\n client_max_body_size __MAX_BODY_SIZE__;\n\n access_log __NGINX_LOG_PER_RESTPP__ combined_no_query;\n error_log __NGINX_ERR_PER_RESTPP__;\n fastcgi_temp_path __TEMP_ROOT__;\n fastcgi_buffers 256 8k;\n\n ###### [BEGIN] customized headers ######\n __HEADER_CONFIG__\n ###### [END] customized headers ######\n\n\n keepalive_timeout 900s;\n\n upstream fastcgi_backend {\n server unix:__FASTCGI_PASS__;\n keepalive 128;\n }\n\n # Use upstream derivative for listing all gsql server \n # that could be used in requesttoken proxy_pass\n __ENABLE_RESTPP_AUTH__ upstream gsql_token_server {\n __ENABLE_RESTPP_AUTH__ __GSQL_TOKEN_SERVER_LIST__\n __ENABLE_RESTPP_AUTH__ }\n\n # Use upstream derivative to list all informant server\n upstream informant_server {\n __INFORMANT_SERVER_LIST__\n }\n\n # Keep it for backward compatibility\n server {\n add_header Strict-Transport-Security \"max-age=63072000; includeSubdomains; preload\";\n ssl_protocols TLSv1.2;\n ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384;\n ssl_prefer_server_ciphers on;\n listen __PORT_PER_RESTPP__ __GUI_CONNECTION_TYPE__;\n server_name localhost;\n large_client_header_buffers __LARGE_CLIENT_HEADER_BUFFER_NUM__ __LARGE_CLIENT_HEADER_BUFFER_SIZE__;\n\n fastcgi_read_timeout 72000s;\n fastcgi_send_timeout 72000s;\n\n __SSL_CERT_ATTR__ __SSL_CERT_PATH__; # if SSL is disabled, here should be '#'\n __SSL_KEY_ATTR__ __SSL_KEY_PATH__; # if SSL is disabled, here should be '#'\n\n\n location / {\n fastcgi_pass fastcgi_backend;\n fastcgi_keep_conn on;\n fastcgi_param REQUEST_METHOD $request_method;\n fastcgi_param CONTENT_TYPE $content_type;\n fastcgi_param CONTENT_LENGTH $content_length;\n fastcgi_param REQUEST_URI $request_uri;\n fastcgi_param GSQL_ASYNC $http_gsql_async;\n fastcgi_param GSQL_TIMEOUT $http_gsql_timeout;\n fastcgi_param GSQL_MEMLIMIT $http_gsql_memlimit;\n fastcgi_param RESPONSE_LIMIT $http_response_limit;\n }\n\n # To ensure the performance of RESTPP, this rule shouldn't be enabled\n # unless restpp.authentication is True.\n # And for performance consideration,\n #!!!!!!! DO NOT USE REGULAR EXPRESSION HERE !!!!!!!\n __ENABLE_RESTPP_AUTH__ location = /requesttoken {\n __ENABLE_RESTPP_AUTH__ proxy_ssl_verify __PROXY_SSL_VERIFY__;\n __ENABLE_RESTPP_AUTH__ proxy_set_header X-Real-IP $remote_addr;\n __ENABLE_RESTPP_AUTH__ proxy_pass __REQUEST_TOKEN_PROTOCOL__://gsql_token_server;\n __ENABLE_RESTPP_AUTH__ }\n }\n\n server {\n\t\tlisten __NGINX_SERVICES_PORT__ __GUI_CONNECTION_TYPE__;\n ssl_protocols TLSv1.2;\n\t\tlarge_client_header_buffers __LARGE_CLIENT_HEADER_BUFFER_NUM__ __LARGE_CLIENT_HEADER_BUFFER_SIZE__;\n\t\tproxy_buffer_size __PROXY_BUFFER_SIZE__;\n\t\tproxy_buffers __PROXY_BUFFERS_NUM__ __PROXY_BUFFERS_SIZE__;\n\t\tproxy_busy_buffers_size __PROXY_BUSY_BUFFERS_SIZE__;\n\n\t\t__SSL_CERT_ATTR__ __SSL_CERT_PATH__; # if SSL is disabled, here should be '#'\n\t\t__SSL_KEY_ATTR__ __SSL_KEY_PATH__; # if SSL is disabled, here should be '#'\n\n\t\tlocation / {\n\t\t\t# Set whether to enable compression\n\t\t\tgzip on;\n\t\t\tgzip_types\n\t\t\t\tapplication/javascript # works significantly with javascript files in GUI\n\t\t\t;\n\t\t\troot __GST_STATIC_FOLDER__;\n\t\t\ttry_files $uri $uri/ @backend;\n\t\t}\n\n\t\tlocation /assets/img/user-uploaded-icons/ {\n\t\t\talias __GUI_DATA_FOLDER__/user_icons/;\n\t\t\ttry_files $uri $uri/ = 404;\n\t\t}\n\n\t\tlocation /admin/ {\n\t\t\t# Set whether to enable compression\n\t\t\tgzip on;\n\t\t\tgzip_types\n\t\t\t\tapplication/javascript # works significantly with javascript files in GUI\n\t\t\t;\n\t\t\talias __ADMIN_PORTAL_STATIC_FOLDER__/;\n\t\t\ttry_files $uri $uri/ = 404;\n\t\t}\n\n\t\tlocation @backend {\n\t\t\tproxy_read_timeout 3600s;\n\t\t\tproxy_set_header X-Real-IP $remote_addr;\n\t\t\tproxy_pass http://localhost:__GUI_WEBSERVER_PORT__;\n\t\t}\n\n\t\tlocation ~ ^/ts3/(?\u003cts3_uri\u003e.*) {\n\t\t\tproxy_read_timeout 3600s;\n\t\t\trewrite ^/ts3/(.*) /$ts3_uri break;\n\t\t\tproxy_set_header X-Real-IP $remote_addr;\n\t\t\tproxy_pass http://localhost:__TS3_REST_PORT__;\n\t\t}\n \n \t\tlocation ~ ^/informant/(?\u003cinformant_uri\u003e.*) {\n \t\t\trewrite ^/informant/(.*) /$informant_uri break;\n \t\t\tproxy_read_timeout 3600s;\n \t\t\tproxy_set_header X-Real-IP $remote_addr;\n \t\t\tproxy_pass http://informant_server;\n \t\t}\n\n\t\tlocation ~ ^/gsqlserver/(?\u003cgsql_uri\u003e.*) {\t\n\t\t\trewrite ^/gsqlserver/(.*) /$gsql_uri break;\n\t\t\tproxy_read_timeout 3600s;\n\t\t\tproxy_set_header X-Real-IP $remote_addr;\n\t\t\tproxy_pass http://localhost:__GSQL_SERVER_PORT__;\n\t\t\tproxy_http_version 1.1;\n\t\t\tproxy_buffering off;\n\t\t}\n\n\t\t# This RESTPP endpoint shares the same security configuration\n\t\tfastcgi_read_timeout 72000s;\n\t\tfastcgi_send_timeout 72000s;\n\n\t\t__ENABLE_RESTPP_AUTH__ location ~ ^/restpp/(?\u003ctoken_uri\u003erequesttoken.*) {\n\t\t__ENABLE_RESTPP_AUTH__ rewrite ^/restpp/(.*) /$token_uri break;\n\t\t__ENABLE_RESTPP_AUTH__ proxy_ssl_verify __PROXY_SSL_VERIFY__;\n\t\t__ENABLE_RESTPP_AUTH__ proxy_set_header X-Real-IP $remote_addr;\n\t\t__ENABLE_RESTPP_AUTH__ proxy_pass __REQUEST_TOKEN_PROTOCOL__://gsql_token_server;\n\t\t__ENABLE_RESTPP_AUTH__ }\n\n\t\tlocation ~ ^/restpp/(.*) {\n\t\t\tfastcgi_pass fastcgi_backend;\n\t\t\tfastcgi_keep_conn on;\n\t\t\tfastcgi_param REQUEST_METHOD $request_method;\n\t\t\tfastcgi_param CONTENT_TYPE $content_type;\n\t\t\tfastcgi_param CONTENT_LENGTH $content_length;\n\t\t\tfastcgi_param REQUEST_URI $1?$query_string; # the url pattern matched above\n\t\t\tfastcgi_param GSQL_TIMEOUT $http_gsql_timeout;\n\t\t\tfastcgi_param GSQL_MEMLIMIT $http_gsql_memlimit;\n\t\t\tfastcgi_param RESPONSE_LIMIT $http_response_limit;\t \n\t\t}\n\t}\n}\n"

Nginx.Port

The serving port for Nginx

14240

Nginx.ResponseHeaders

The customized headers in HTTP Response

[{"FieldName":"X-Frame-Options","FieldValue":"SAMEORIGIN"}]

Nginx.SSL.Cert

Public certificate for SSL. (Could use @cert_file_path to parse the certificate from file)

nan

Nginx.SSL.Enable

Enable SSL connection for all HTTP requests

false

Nginx.SSL.Key

Private key for SSL. (Could use @key_file_path to parse the key from file)

nan

Nginx.WorkerProcessNumber

The number of worker processes for Nginx

4

RESTPP

Name Description Default

RESTPP.BasicConfig.Env

The runtime environment variables, separated by ‘;’

LD_PRELOAD=$LD_PRELOAD; LD_LIBRARY_PATH=$LD_LIBRARY_PATH;

RESTPP.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

RESTPP.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

RESTPP.BasicConfig.LogConfig.LogLevel

The log level(“OFF”, “BRIEF”, “DEBUG”, “VERBOSE”), default is BRIEF

BRIEF

RESTPP.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

RESTPP.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for RESTPP

restpp

RESTPP.BasicConfig.Nodes

The node list for RESTPP

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

RESTPP.FCGISocketBackLogMaxCnt

RESTPP fcgi socket backlog max length which is the listen queue depth used in the listen() call.

36864

RESTPP.FCGISocketFileRelativePath

The relative path of FCGI socket for RESTPP-Nginx communitation under $TempRoot

rest/restpp-nginx.fcgi.sock

RESTPP.Factory.DefaultLoadingTimeoutSec

The default per request loading timeout (s) for RESTPP

600

RESTPP.Factory.DefaultQueryTimeoutSec

The default query timeout (s) for RESTPP

16

RESTPP.Factory.DynamicEndpointRelativePath

RESTPP’s relative (to data root) path to store the dynamic endpoint

restpp/endpoint/

RESTPP.Factory.DynamicSchedulerRelativePath

RESTPP’s relative (to data root) path to store the dynamic scheduler

restpp/scheduler/

RESTPP.Factory.EnableAuth

Enable authentication of RESTPP

false

RESTPP.Factory.HandlerCount

RESTPP’s handler count

4

RESTPP.Factory.QueryMemoryLimitMB

The memory limit of query runs for container on disk. The default value is -1, meaning no limit

-1

RESTPP.Factory.StatsIntervalSec

RESTPP’s time interval to collect stats (e.g. QPS)

60

RESTPP.GPEResponsePort

The port of RESTPP to accept GPE response

5400

RESTPP.GSEResponsePort

The port of RESTPP to accept GSE response

5500

RESTPP.HttpServer.Enable

Enable RESTPP’s http server

false

RESTPP.HttpServer.Port

RESTPP’s http server port

10000

RESTPP.HttpServer.WorkerNum

RESTPP’s http server worker number

2

RESTPP.NginxPort

The port of RESTPP to accept upstream Nginx requests

9000

RESTPP.WorkLoadManager.MaxHeavyBuiltinQueries

The maximum concurrent running “heavy“ built-in queries (kstep_expansion, searchvertex, allpaths, shortestpath) on one restpp server.

100

Security

Name Description Default

Security.LDAP.AdminDN

Configure the DN of LDAP user who has read access to the base DN specified above. Empty if everyone has read access to LDAP data: default empty

nan

Security.LDAP.AdminPassword

Configure the password of the admin DN specified above. Needed only when admin_dn is specified: default empty

secret

Security.LDAP.BaseDN

Configure LDAP search base DN, the root node to start the LDAP search for user authentication: must specify

nan

Security.LDAP.Enable

Enable LDAP authentication: default false

false

Security.LDAP.Hostname

Configure LDAP server hostname: default localhost

localhost

Security.LDAP.Port

Configure LDAP server port: default 389

389

Security.LDAP.SearchFilter

Configure LDAP search base DN, the root node to start the LDAP search for user authentication.

(objectClass=*)

Security.LDAP.Secure.Protocol

Enable SSL/StartTLS for LDAP connection [none/ssl/starttls]: default none

none

Security.LDAP.Secure.TrustAll

Configure to trust all LDAP servers (unsafe): default false

false

Security.LDAP.Secure.TruststoreFormat

Configure the truststore format [JKS/PKCS12]: default JKS

JKS

Security.LDAP.Secure.TruststorePassword

Configure the truststore password: default changeit

changeit

Security.LDAP.Secure.TruststorePath

Configure the truststore absolute path for the certificates used in SSL: default empty

nan

Security.LDAP.UsernameAttribute

Configure the username attribute name in LDAP server: default uid

uid

Security.SSO.SAML.AssertionSigned

Require Identity Provider to sign assertions: default true

true

Security.SSO.SAML.AuthnRequestSigned

Sign AuthnRequests before sending to Identity Provider: default true

true

Security.SSO.SAML.BuiltinUser

The builtin user for SAML

__GSQL__saml

Security.SSO.SAML.Enable

Enable SAML2-based SSO: default false

false

Security.SSO.SAML.IDP.EntityId

Identity Provider Entity ID: default http://idp.example.com

http://idp.example.com

Security.SSO.SAML.IDP.SSOUrl

Single Sign-On URL: default http://idp.example.com/sso/saml

http://idp.example.com/sso/saml

Security.SSO.SAML.IDP.X509Cert

Identity Provider’s x509 Certificate filepath: default empty. You can use @/cert/file/path to pass the certificate from a file.

nan

Security.SSO.SAML.MetadataSigned

Sign Metadata: default true

true

Security.SSO.SAML.RequestedAuthnContext

Authentication context (comma separate multiple values)

nan

Security.SSO.SAML.ResponseSigned

Require Identity Provider to sign SAML responses: default true

true

Security.SSO.SAML.SP.Hostname

TigerGraph Service Provider URL: default http://127.0.0.1:14240

http://127.0.0.1:14240

Security.SSO.SAML.SP.PrivateKey

Content of the host machine’s private key. Require PKCS#8 format (start with “BEGIN PRIVATE KEY”). You can use @/privatekey/file/path to pass the certificate from a file.

nan

Security.SSO.SAML.SP.X509Cert

Content of the x509 Certificate: default empty. You can use @/cert/file/path to pass the certificate from a file.

nan

Security.SSO.SAML.SignatureAlgorithm

Signiture algorithm [rsa-sha1/rsa-sha256/rsa-sha384/rsa-sha512]: default rsa-sha256

rsa-sha256

System

Name Description Default

System.AppRoot

The root directory for TigerGraph applications

/home/tigergraph/tigergraph/app

System.AuthToken

The authorization token for TigerGraph services

7hVw4bIu1t6XtOPJXZPEhy4wyZJMsRQX

System.Backup.CompressProcessNumber

The number of concurrent process for compression during backup

8

System.Backup.Local.Enable

Backup data to local path

false

System.Backup.Local.Path

The path to store the backup files

nan

System.Backup.S3.AWSAccessKeyID

The AWS access key ID for s3 bucket of backup

nan

System.Backup.S3.AWSSecretAccessKey

The secret access key for s3 bucket

nan

System.Backup.S3.BucketName

The S3 bucket name

nan

System.Backup.S3.Enable

Backup data to S3 path

false

System.Backup.TimeoutSec

The backup timeout in seconds

18000

System.CrossRegionReplication.Enabled

Enable Kafka Mirrormaker

false

System.CrossRegionReplication.PrimaryKafkaIPs

Kafka mirrormaker primary cluster’s IPs, separator by ‘,’

nan

System.CrossRegionReplication.PrimaryKafkaPort

Kafka mirrormaker primary cluster’s KafkaPort

30002

System.CrossRegionReplication.TopicPrefix

The prefix of GPE/GUI/GSQL Kafka Topic, by default is empty.

nan

System.DataRoot

The root directory for data

/home/tigergraph/tigergraph/data

System.ElasticCluster.Enabled

Enable elastic cluster

false

System.ElasticCluster.MountPrefix

Elastic cluster mount prefix

nan

System.Event.EventInputTopic

Kafka topic name of event input queue

EventInputQueue

System.Event.EventOffsetFolderRelativePath

The relative path (to the System.DataRoot) of the folder to keep track of Kafka offsets for event input/output queue

offset

System.Event.EventOutputTopic

Kafka topic name of event output queue

EventOutputQueue

System.HostList

The aliases and hostnames/IPs for nodes

[{"ID":"m1","Hostname":"192.168.1.1","Region":"r1"},{"ID":"m2","Hostname":"192.168.1.2","Region":"r2"}]

System.License

The license key for TigerGraph system

nan

System.LogRoot

The root directory for TigerGraph logs

/home/tigergraph/tigergraph/log

System.SSH.ConfigFileRelativePath

The relative path (to the System.DataRoot) of SSH config file

ssh/ssh_config

System.SSH.Port

SSH port

22

System.SSH.User.Password

OS User password (optional if using privatekey)

tigergraph

System.SSH.User.Privatekey

OS user private key path

nan

System.SSH.User.Username

OS Username for TigerGraph database

tigergraph

System.TempRoot

The temporary directory for TigerGraph applications

/home/tigergraph/tigergraph/tmp

TS3

Name Description Default

TS3.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

TS3.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

TS3.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

TS3.BasicConfig.LogConfig.LogLevel

The log level(“DEBUG”,“INFO”,“WARN”,“ERROR”,“PANIC”,“FATAL”), default is INFO

INFO

TS3.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

TS3.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for TS3

ts3

TS3.BasicConfig.Nodes

The node list for TS3

[{"HostID":"m1","Partition":1,"Replica":0},{"HostID":"m2","Partition":2,"Replica":0}]

TS3.BufferSize

The buffer size of TS3

10

TS3.DBRelativePath

The relative path (to the System.DataRoot) of TS3 database source folder

ts3/db

TS3.DbTrace

Enable tracing for db operations

false

TS3.Metrics

The metrics TS3 will be collecting

cpu,mem,diskspace,qps,servicestate,network,connection

TS3.RetentionPeriodDay

The period in days for local database records to keep, set -1 for keeping forever

30

TS3Server

Name Description Default

TS3Server.BasicConfig.Env

The runtime environment variables, separated by ‘;’

nan

TS3Server.BasicConfig.LogConfig.LogFileMaxDurationDay

The maximum number of days to retain old log files based on the timestamp encoded in their filename

90

TS3Server.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

TS3Server.BasicConfig.LogConfig.LogLevel

The log level(“DEBUG”,“INFO”,“WARN”,“ERROR”,“PANIC”,“FATAL”), default is INFO

INFO

TS3Server.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

TS3Server.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for TS3Serer

ts3serv

TS3Server.BasicConfig.Nodes

The node list for TS3Server(Currently only support one node)

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

TS3Server.GrpcPort

The grpc api port for TS3Server

19001

TS3Server.RestPort

The restful api port for TS3Server

19000

ZK

Name Description Default

ZK.BasicConfig.Env

The runtime environment variables, separated by ‘;’

ZK_SERVER_HEAP=4096;

ZK.BasicConfig.LogConfig.LogFileMaxSizeMB

The maximum size in megabytes of the log file before it gets rotated

100

ZK.BasicConfig.LogConfig.LogLevel

The log level for zk (“TRACE”, “DEBUG”, “INFO”, “WARN”, “ERROR”, “FATAL” “OFF”)

INFO

ZK.BasicConfig.LogConfig.LogRotationFileNumber

The maximum number of old log files to retain

100

ZK.BasicConfig.LogDirRelativePath

The relative path (to the System.LogRoot) of log directory for ZK

zk

ZK.BasicConfig.Nodes

The node list for Zookeeper

[{"HostID":"m1","Partition":0,"Replica":1},{"HostID":"m2","Partition":0,"Replica":2}]

ZK.DataRelativePath

The data dir of zookeeper under $DataRoot

zk

ZK.ElectionPort

The port for Zookeeper to do leader election

3888

ZK.ForceSync

The force syncronize property of zookeeper

false

ZK.InitLimit

The amount of time, in ticks(by default 2s for one tick), to allow followers to connect and sync to a leader. Increased this value as needed, if the amount of data managed by ZooKeeper is large

30

ZK.Port

The serving port for Zookeeper

19999

ZK.QuorumPort

The port for Zookeeper to do peer communication

2888

ZK.StartTimeoutMS

Start zookeeper timeout

120000

download/upload/delete catalog

Name Description Default

download/upload/delete catalog. Default value: 20

nan

nan