AWS S3 Loader User Guide

Overview

AWS Simple Storage Service (S3) is a popular destination to store data in the cloud and has become an essential component in the data pipeline of many enterprises. It is an object storage service on the AWS platform which can be accessed through a web service interface.

TigerGraph's S3 Loader makes it easier for you to integrate with an Amazon S3 service and ingest data from S3 buckets either in realtime or via one-time data import into the TigerGraph System. Your TigerGraph cluster can be deployed either on-premises or in a cloud environment.

Architecture

From a high level, a user provides instructions to the TigerGraph system through GSQL, and the external Amazon S3 data is loaded into TigerGraph's RESTPP server. The following diagram demonstrates the S3 Loader data architecture.

Prerequisites

You should have uploaded your data to Amazon S3 buckets.

Once you have the buckets set up, you need to prepare the following two configuration files and place them in your desired location in the TigerGraph system:

  1. S3 data source configuration file: This file includes the credentials for accessing Amazon S3 which consists of access key and secret key. Through the configuration file, the TigerGraph system acquires the authority to access your buckets. Please see the example in Step 1. Define the Data Source.

  2. S3 file configuration file: This file specifies various options for reading data from Amazon S3. Please the see example in Step 2. Create a Loading Job.

Configuring and Using the S3 Loader

There are three basic steps:

The GSQL syntax for the S3 Loader is designed to be consistent with the existing GSQL loading syntax.

1. Define the Data Source

CREATE DATA_SOURCE

Before starting a S3 data loading job, you need to define the credentials to connect to Amazons S3. The CREATE DATA_SOURCE statement defines a data_source type variable, with a sub type S3:

S3 Data Source Configuration File

After the data source is created, use the SET command to specify the path to a configuration file for that data source.

This SET command reads, validates, and applies the configuration file, integrating its settings into TigerGraph's dictionary. The data source configuration file's content, structured as a JSON object, describes the S3 credential settings, including the access key and secret key. A sample s3.config is shown in the following example:

For simplicity, you can merge the CREATE DATA_SOURCE and SET statements:

ADVANCED: MultiGraph Support

The S3 Loader supports the TigerGraph MultiGraph feature. In the MultiGraph context, a data source can be either global or local:

  1. A global data source can only be created by a superuser, who can grant the global data source to any graph.

  2. An admin user can only create a local data source, which cannot be accessed by other graphs.

The following are examples of permitted DATA_SOURCE operations.

  1. A superuser may create a global level data source without assigning it to a particular graph:

2. A superuser may grant/revoke a data source to/from one or more graphs:

3. An admin user may create a local data source for a specified graph which the admin user administers:

DROP DATA_SOURCE

A data_source variable can be dropped by a user who has the privilege. A global data source can only be dropped by a superuser. A local data_source can only be dropped by an admin for the relevant graph or by a superuser. The syntax for the DROP command is as follows:

Below is an example with a few legal s3 data_source create and drop commands.

SHOW DATA_SOURCE

The SHOW DATA_SOURCE command will display a summary of all existing data_sources for which the user has privilege:

2. Create a Loading Job

The S3 Loader uses the same basic CREATE LOADING JOB syntax used for standard GSQL loading jobs. A DEFINE FILENAME statement should be used to assign a loader FILENAME variable to a S3 data source name and the path to its config file.

In addition, the filename can be specified in the RUN LOADING JOB statement with the USING clause. The filename value set by a RUN statement overrides the value set in the CREATE LOADING JOB.

Below is the syntax for DEFINE FILENAME when using the S3 Loader. In the syntax, $DATA_SOURCE_NAME is the S3 data source name, and the path points to a configuration file which provides information about how to read an Amazon S3 file. The S3 file configuration file must be in JSON format.

Example: Load a S3 Data Source s1, where the path to the file configuration file is "~/files.conf":

S3 File Configuration File

The S3 file configuration file tells the TigerGraph system exactly which Amazon S3 files to read and how to read them. Similar to the data source configuration file described above, the contents are in JSON object format. An example file is shown below.

The "file.uris" key is required. It specifies one or more paths on your Amazon S3 bucket. Each path is either to an individual file or to a directory. If it is a directory, then each file directly under that directory is included. You can specify multiple paths by using a comma-separated list. An example with multiple paths is show below:

Instead of specifying the config file path, you can also directly provide the S3 file configuration as a string argument, as shown below:

ADVANCED: Configure How to Read S3 File

Besides the required "file.uris" key, you can further configure the S3 loader. A sample full configuration is shown below:

Following is a detailed explanation of each option:

  • "tasks.max" (default is 1): specifies the maximum number of tasks which can run in parallel. E.g. if there are 2 files and 2 tasks, each task will handle 1 file. If there are 2 files and 1 task, the single task will handle 2 files. If there is 1 file and 2 tasks, one of the tasks will handle the file.

  • "file.uris": specifies the path(s) to the data files on Amazon S3. The path can also be dynamic by using expressions to modify the URIs at runtime. These expressions have the form ${XX} where XX represents a pattern from DateTimeFormatter Java class.

  • "file.regexp" (default is .* which matches all files): the regular expression to filter which files to read.

  • "file.recursive" (default is false): whether to recursively access all files in a directory.

  • "file.scan.interval.ms" (default is 60000): the wait time in ms before starting another scan of the file directory after finishing the current scan. Only applicable in stream mode.

  • "file.reader.type" (default is text): the type of file reader to use. If text, read the file line by line as pure text. If parquet, read the file as parquet format.

  • "file.reader.batch.size" (default is 1000): maximum number of lines to include in a single batch.

  • "file.reader.text.archive.type" (default is auto): the archive type of the file to be read. If auto, determine the archive type automatically. If tar, read the file with tar format. if zip, read the file with zip format. If gzip, read the file with gzip format. If none, read the file normally.

  • "file.reader.text.archive.extensions.tar" (default is tar): the list of file extensions to be read with tar format.

  • "file.reader.text.archive.extensions.zip" (default is zip): the list of file extensions to be read with zip format.

  • "file.reader.text.archive.extensions.gzip" (default is gzip): the list of file extensions to be read with gzip format.

3. Run the Loading Job

The S3 Loader uses the same RUN LOADING JOB statement that is used for GSQL loading from files. Each filename variable can be assigned a string "DATA_SOURCE Var:file configure", which will override the value defined in the loading job. In the example below, the config files for f2 and f3 are being set by the RUN command, whereas f1 is using the config which was specified in the CREATE LOADING JOB statement.

All filename variables in one loading job statement must refer to the same DATA_SOURCE variable.

There are two modes for the S3 Loader: streaming mode and EOF mode. The default mode is streaming mode. In streaming mode, loading will never stop until the job is aborted. In EOF mode, loading will stop after consuming the provided Amazon S3 file objects.

To set EOF mode, an optional parameter is added to the RUN LOADING JOB syntax:

Manage Loading Jobs

S3 Loader loading jobs are managed the same way as native loader jobs. The three key commands are

  • SHOW LOADING STATUS

  • ABORT LOADING JOB

  • RESUME LOADING JOB

For example, the syntax for the SHOW LOADING STATUS command is as follows:

To refer to a specific job instance, use the job_id which is provided when RUN LOADING JOB is executed. For each loading job, the above command reports the following information :

  1. current loaded lines

  2. average loading speed

  3. loaded size

  4. duration

See Inspecting and Managing Loading Jobs for more details.

S3 Loader Example

Here is an example code for loading data through the S3 Loader: